12-31-2012 03:00 AM - edited 03-10-2019 07:55 PM
Hi,
Is it prossible to create a Data repository on Tape Drive and use it to perform:-
c. Configure Full View Database Backup
Also if backup can be taken on Tape drive and used for resoration.
As per information NFS staging Url is used if the database size is big and low disk space on ACS.
Regards.
Solved! Go to Solution.
12-31-2012 04:52 AM
Satish,
Here are the protocols that are supported by ACS with respect to backup and restore operations. I dont think (or know) if the tape drives use any of these protocols.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_operations.html#wp1096377
Thanks,
Sent from Cisco Technical Support iPad App
01-03-2013 06:19 AM
You are welcome, please do not forget to mark this question as resolved.
Thanks,
Sent from Cisco Technical Support iPad App
12-31-2012 04:52 AM
Satish,
Here are the protocols that are supported by ACS with respect to backup and restore operations. I dont think (or know) if the tape drives use any of these protocols.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_operations.html#wp1096377
Thanks,
Sent from Cisco Technical Support iPad App
01-03-2013 06:19 AM
You are welcome, please do not forget to mark this question as resolved.
Thanks,
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide