ACS 5.3 time and telnet device name

[dpugalendi.d]

Dear All,

This is the great place for ACS discussions , i need two more inputs from experts

acsserver

Thu Sep 13 14:35:28 UTC 2012

pughaz

15

[ CmdAV=ip tacacs source-interface FastEthernet 0/1 ]

Device Type:All Device Types:ROUTERS, Location:All Locations:NON DC DEVICES

On the above message

1. Need to chang time from UTC to IST

2.  The Device column is not showing the exact device name ; i telnet and config changed , it is showing the device group name only , how to get the exact device name i telnet on this message

[Tarik Admani · Accepted solution]

Hi,

You can change the timezone through the cli:

To get the exact syntax of the timezone-

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/command/reference/cli_app_a.html#wp1892764

Here is the command to do this -

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/command/reference/cli_app_a.html#wp1894584

As far as the device name not showing up, can you check the column settings and see if that may been removed.

Thanks,

Tarik Admani
*Please rate helpful posts*