cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2497
Views
4
Helpful
8
Replies

ACS 5.4 to ISE 1.2 migration

Karel Navratil
Level 1
Level 1

Hi,

does somebody have an idea how to migrate users from ACS 5.4 to ISE?

I tried with migtool, but it's telling me that migration from ACS 5.4 is not supported.

However if I install older ACS 5.1 and restore a backup from ACS 5.4 then it fail because it doesn't match installed application.

I don't want to use backup from older ACS as we put since that time so many users ...

Thanks for any hint.

Karel

8 Replies 8

aqjaved
Level 3
Level 3

Case Solution:

Please check the below guide for ACS to ISE 1.2 Migration. It will helpful for you.

http://www.cisco.com/en/US/docs/security/ise/1.2/migration_guide/ise_mig_guide.pdf

As I wrote ... we are running ACS 5.4 and it's impossible to use backup from 5.4 to import on 5.3.

So the Migration guide is currently not helpfull at all.

Hi Karel,

As I see this is not supported so far. What you can do is to export your users from 5.4 and import them on 5.3 then proceed with the backup and migration process.

If you still need to go with 5.4 you better communicate the TAC. They may help you better (they may probably have a patch to fix the issue with the migration from 5.4 to ISE).

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"

There's no way to migrate from ACS 5.4 to ISE at this time, even with TAC.

Is there a way now to migrate from ACS 5.4 to ISE 1.2?

Looks like 5.4 was left in the dust. 

 

5.3 to 1.2 is supported

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/migration_guide/ise_migration_guide/ise_mig_overview.html

 

With ISE 1.3, 5.5 and 5.6 to 1.3 is supported

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/migration_guide/b_ise_MigrationGuide/b_ise_MigrationGuide12_preface_00.html

Ravi Singh
Level 7
Level 7

It is not supported you cannot migrate from ACS 54. to ISE 1.2.

Naresh Ginjupalli
Cisco Employee
Cisco Employee

Hi,

The migration from ACS 5.4/5.5 to ISE will be supported in ISE 1.3 which is about to be release.

Thanks,

Naresh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: