cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1884
Views
0
Helpful
3
Replies

ACS 5.8.0.32 Cumulative Patch 8 issue

wom1
Level 1
Level 1

I have a installed Cisco ACS 5.8.0.32 with Patch Level 7 and added Patch 8 on a SNS-3415-K9.

The patch shows successfully installed an after the reboot. The Patch Level do not match.

 

sh version

 

Cisco ACS VERSION INFORMATION
-----------------------------
Version : 5.8.0.32.7
Internal Build ID : B.442
Patches :
5-8-0-32-6
5-8-0-32-7

 

there shows no Patch 8.

I repeat the Installation

Patch '5-8-0-32-8' is already installed.
% Error: Failure to open / validate the patch

 

Also i tried to remove the patch bot it also to now work

 

/admin# acs patch remove 5-8-0-32-8
Note that uninstalling a patch that is not the one most recently installed may cause system instability.
Removing ACS patch requires a restart of ACS services.
Do you want to Continue?  (yes/no) yes
5-8-0-32-8 is not the latest patch installed. Please remove the lastest patch 5-8-0-32-7 and try again
/admin#

 

Have any one Information how do solved that issue?

 

1 Accepted Solution

Accepted Solutions

wom1
Level 1
Level 1
After install ACS 5.8.0.32 Cumulative Patch 9 the issue was solved.

View solution in original post

3 Replies 3

Gary.Musgrave
Level 1
Level 1

Hi wom1,

 

Did you ever manage to get this issue resolved?  I have came across the same issue and wondering if you ever managed to get this sorted.

Hi Gary,

 

no the problem was not solved but until now there a no issues on the functionallity of ACS.

 

wom1
Level 1
Level 1
After install ACS 5.8.0.32 Cumulative Patch 9 the issue was solved.