05-04-2020 04:38 AM
Hi guys,
is acs 5.8 compatible with WLC9800 and C9200L for dot1x and mab?
Thank you!
Solved! Go to Solution.
11-01-2021 09:42 PM
MY wireless colleague tells me the WLC 9800 is NOT compatible with ACS. For that reason we recently setup ISE for a customer migrating to the new WLC. ISE worked fine for both RADIUS (end users' wireless authentications) and TACACS (Admins logging into the WLC GUI).
05-04-2020 05:36 AM
Yes it's perfect for the job if all you're doing is standard RADIUS and TACACS+ - those Catalyst switches run IOS-XE and you can use any RADIUS/TACACS+ server for NAC/AAA - nothing proprietary going on here ;-)
If you are planning to do TrustSec then I think you should be looking at ISE instead.
11-01-2021 04:11 PM
Has anyone used Cisco ACS TACACS with the Catalyst 9800 WLC ? Having issues with device not recognizing all the menu options even with priv 15 access set up , all we are seeing is the Dashboard and Monitor. Using code 17.3.3 AireOS WLCs are working fine with Cisco ACS. Not the 9800.
11-01-2021 09:42 PM
MY wireless colleague tells me the WLC 9800 is NOT compatible with ACS. For that reason we recently setup ISE for a customer migrating to the new WLC. ISE worked fine for both RADIUS (end users' wireless authentications) and TACACS (Admins logging into the WLC GUI).
11-02-2021 10:11 AM
Thanks sir . This helps us.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide