01-25-2017 04:57 AM - edited 03-11-2019 12:23 AM
Hello,
today i've installed patch 6 (5-8-0-32-6.tar.gpg) on 3 1121's.
Everything's working fine but I can't see any logs. On the dashboard I click on "Radius Authentication" or "Tacacs Authentication", a new tab opens, the light blue appears with a frame, but no data.
We've got a standalone and a cluster, were the secondary acs is the log-collector, this behavior is on all machines
I've tried with Firefox 45esr and IE 11
Any help?
thanks
Karl
01-25-2017 11:27 AM
Seems like browsers are supported as per release notes. However in maintenance window, you can reset the log collector through
System Administration > | ... > | Configuration > | Log Configuration > | Log Collector |
Just set log collector to " No log collector". Services will restart . Once the services come back, set the log collector again. It will take around 5-10 minutes.
See if that works for you.
Regards
Gagan
PS : rate if it helps!!!!!
01-25-2017 10:37 PM
No, doesn't work.
tried this on our testmachine (no cluster, all on one machine)
01-27-2017 07:03 PM
Is that possible if you can move the log collector to other node using the same option and see if that makes any difference.
Did you check if other reports are working or not.
Regards
Gagan
08-17-2017 04:21 AM
very simpel:
all my browsers blocked the Flashplayer.
but: in the year 2017: do we really need flashplayer on a security-device???
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide