12-30-2010 04:22 AM - edited 03-10-2019 05:40 PM
Hi,
i want to control manageent access to symbol Wireless Switch WS6000 with my ACS.
the issue is that i can't find the Vendor Specific Attributes forSymbol devices.
i wonder if theres a way to control it with IETF or Other Radius Attributes.
thanks in advance
Antero Vasconcelos
12-30-2010 06:20 AM
Hi Antero,
This depends on the Symbol devices: if they support IETF Radius attributes (or any other Radius attribute that ACS could pass back from its dictionary), then it can definitely be done.
Moreover, ACS supports the creation of new Radius attributes. For example, for ACS 4.2 for Windows:
So you may also want to check with Symbol in case you'd need to create some specific Radius attributes that are not yet in the default ACS dictionary.
Regards,
Fede
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
01-20-2012 03:11 AM
05-17-2012 01:31 AM
I have found the answer from a discussion that I opened this week. Your question is exactly the same as mine and the workaround below works for both WS5100 and RFSx000 controllers!
Here is a snippet:
I can see the issue you are refering to and does appear to be a bug - will dig out if there is one and if not open
A work around would be to not use an Attribute Type of enumeration but rather an Unsigned integer
Would then need to enter the value directly in the authorization profile rather than selecting from an enumeration
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide