This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Hello,
I am trying to migrate an ACS 4.1.1(24) using the migraton tool to ACS 5.2. The tool is working OK. It migrates the users, groups, NDG, etc. and the reports are showing no errors.
The problem is with the Enable password of the users. The users in the ACS 4 have the TACACS+ Enable Password configured, but after the migration it appears empty in the ACS 5.
Any ideas? Did someone find the same problem?
Thanks in advance.
Hi there,
Here is a list with the supported options that will be migrated from 4.x to 5.x and I don't see the Enable Password in that list:
If you go to Internal User in that document you posted, you will see the following table:
The last one is the password I am refering to. So, based on this list, it is supported by the tool.
Regards,
Javier
Javier,
You are right about that, I missed that chart.
I just did a test in my ACS 5.3 to be sure and it worked fine, the enable password for my users was migrated successfully. The only changed I did before migrating the users was to enable the TACACS+ Enable password option from System Configuration/User settings.
I will try with a 5.2 later today if possible and will let you know.