ACS Vmware - cannot ping?

[Mariusz Kuriata]

I set up a trial version of an ACS server, put it in VMWare. I went through the whole set up process, ACS installed correctly but cannot ping anything from the ACS in my LAN (i chose 'bridged mode' in vmware). Is there anything else I should do? When I do 'sh run' I can see g0 with an IP address from my LAN that I assigned...

Please assist.

[Mariusz Kuriata]

used NAT mode in vmware... that worked...

[kaaftab]

       Kindly use the VMware in NAT mode and if you are using the bridge try setting DHCP setting and so the testing by pinging to the gw.

[srinu.allamani]

Go to ACS and not shutdown the interface

In ACS

acs/admin#config terminal

acs/admin#interface fast0/0

acs/admin#no shutdown