cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
346
Views
0
Helpful
1
Replies

Guest Wireless Cisco ISE 1.3

abhishek.marat1
Level 1
Level 1

I am setting up guest wireless in my enterprise using Cisco ISE 1.3.

 

I have set up Authorization profiles and Authentication conditions for Guest Wireless. I am however not sure of the Authentication results (the allowed protocol section). Since I want to give Guests INTERNET-ONLY access, I have configured WLC with a ACL and tied that ACL-name to ISE. However, when it comes to Authentication results à Allowed protocols, I am unsure of what to include. For instance, I have created an allowed protocol named ‘Wireless_Access’, screenshot attached below..

 

Please let me know what options have to be checked to suit a guest environment. Any help would be much appreciated.. thanks!

1 Reply 1

Hi,

Below you can find a configuration example for guest access using ISE1.3.

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

 

Hope this helps.

 

Regards