ACS-VPN3020, "CS password invalid"

[cjrchoi11]

ACS(3.3.2 build2) is RADIUS server of VPN3020 and I have many failed attemps message "CS password invlid" which from VPN client even no problem encounted.

What's meaning this message and how can stop ?

Thanks,

[umedryk]

It may be that the user has no enable password set up. Set the TACACS+ Enable Password within the Advanced TACACS+ Settings section.

If you do not see the Advanced TACACS+ Settings section among the user setup options, go to Interface Configuration> Advanced Configuration Options> Advanced TACACS+ Features and select that option to have the TACACS+ settings appear in the user settings. Then select Max privilege for any AAA Client (this will typically be 15) and enter the TACACS+ Enable Password that you want the user to have for enable.

Refer to http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/user02/aa.htm

[cjrchoi11]

I only have RADIUS and no TACACS+. Any idea for RADIUS case ?

Thanks,

[cjrchoi11]

I never thought about the possibility of input wrong password but it conclude that's cause.

Thanks,