ACS

[aksher]

Need inputs on to do telnet to the ACS from a L3 6513 switch?

Am trying to telnet from 6513 from where the traffic passes through a FWSM before hitting the ACS.

Am able to see hitcount on the FWSM too.

[sachinraja]

Hello Aksher,

are you trying telnet to Access Control Server (ACS)? If so, i really dont think you can !!!! You can access ACS through GUI on http or https only....

Raj

[a.kiprawih]

sachinraja is right pointing it out. You can't telnet to ACS regardless if it's running on appliance or server. Only possible if you have separate telnet services running on the same server where your ACS resides.

Otherwise, use web GUI.

HTH

AK