cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1696
Views
5
Helpful
2
Replies
Kashish_Patel
Explorer

Add RADIUS attributes under "Group Setup" in ACS 4.2

Hi Security Experts,

I need to add RADIUS attributes for a custom vendor under "Group Setup" page in ACS 4.2. As of now, I see Cisco Aironet RADIUS Attributes,

IETF RADIUS Attributes etc in "Group Setup" page. How can I make sure that the RADIUS attributes for a vendor also appear on that page?

PS: I rate useful posts

Thanks,

Kashish

1 ACCEPTED SOLUTION

Accepted Solutions
Karsten Iwen
VIP Mentor

Under "Interface" you can enable which RADIUS-Attributes you want to display. Probably there's just one checkmark missing for your vendor.

The Options for RADIUS are described here:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

View solution in original post

2 REPLIES 2
Karsten Iwen
VIP Mentor

Under "Interface" you can enable which RADIUS-Attributes you want to display. Probably there's just one checkmark missing for your vendor.

The Options for RADIUS are described here:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

View solution in original post

Thanks. That answers my question!

Content for Community-Ad