Adding Arista switch to authenticate with ISE TACACS

[ahmedilyas4320]

HI There,

I am trying to add Arista Switch to authenticate with tacacs in cisco ISE, i found a document with Arista which talks about adding arista to ISE but with Radius authentication , I want to know how can i do it with TACACS ? please advice

https://wifihelp.arista.com/post/integration-with-cisco-ise/?pdf=981

[Aref Alsouqi]

I don't believe there is any limitation in configuring TACACS on Arista with ISE. I think the document you shared is talking about RADIUS because it is focused on dot1x deployment where RADIUS would be the transport protocol.

I found this link with how to set up TACACS on Arista:

https://www.arista.com/en/um-eos/eos-section-4-6-tacacs-configuration-examples

[andy!doesnt!like!uucp]

may be it will help?

https://eos.arista.com/cvp-aaa-tacacs-authorization-with-cisco-ise/

+ this https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208-Configure-ISE-2-0-IOS-TACACS-Authentic.html