cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2596
Views
0
Helpful
5
Replies

Alarms: Misconfigured Network Device Detected

gurmjaspreet
Level 1
Level 1

Hi,

 

We have 2 ISE (HA) and 2 WLC (primay Secondary) configured in our network.

In ISE i am getting this error 12929 NAS sends RADIUS accounting update messages too frequently. 

 

Please help!!!! :)

 

 

Regards

Jass

5 Replies 5

Just remove the WLCs from your ISE and add them back in. This worked for me.

Cheers

Abhishek Abhishek
Cisco Employee
Cisco Employee

Verify NAS configuration. Verify known NAS issues.

Saurav Lodh
Level 7
Level 7

Frequent alarms on 12929 NAS sends RADIUS accounting update messages too frequently


The message on RADIUS accounting updates occur too frequently is related to the following:

Table A-23 RADIUS Settings @

http://www.cisco.com/en/US/docs/security/ise/1.2/u​ser_guide/ise_ui_reference_administration.html#wp1​293445


Accounting Suppression Interval : Enter the time interval in seconds for which the reporting of accounting requests to be suppressed.

When NAS sends accounting update regarding specific endpoint more often than "Accounting Suppression Interval" then AAA Runtime passes to M&T only one record during this interval. When accounting update comes too often from some NAS then AAA Runtime sends an alarm to M&T.