cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1776
Views
0
Helpful
2
Replies

any way to merge to master ACS servers via replication?

ajamua
Beginner
Beginner

I am trying to merge the network settings and local user & group databases between to master ACS servers. My understanding is that when you do replication it copies a "mirror" image of the field in question and pushes that out to replication partners. If that is true I will lose some data on one of the master ACS servers. Please advise.

2 Replies 2

lisa.hall
Explorer
Explorer

I would look into using csutil –d on both servers and then parsing, comparing and combining the two files. I don’t think I’d attempt it with replication.

jwitherell
Beginner
Beginner

When I was setting up two Network Access Servers (NASs) at two locations, I set up partner ACS/NT 2.4 servers. My original idea was to have the NASs "hit" the ACS server sitting right next to it. When we got into looking at how replication works, we realized both NASs need to hit only one of the servers. The reason was that the Failed Attempts counters, password changes, accounting and other information would only reliably be replicated in one direction. Cisco TAC confirmed this.

I originally thought they cross-replicated in a similar manner as Lotus Notes. It turns out that it is more of a copy operation. I was not pleased with the idea that one of my ACS servers sitting right next to one of my NASs would be unused during normal operation, and that AS5300 would have to hike to the other end of the WAN to hit the master. Alas, this is exactly what we had to do.

The bottom line (and I'd LOVE for someone to prove me wrong) is that you have to have a single master ACS server, and point all your NAS devices to it. In addition, you must do *all* your administrations on that server and schedule *all* the replications as a one-way/downstream operation from that master ACS server. The only time the other ACS servers would be used is if the the master ACS is unavailable.

One other nifty anomoly we see is when the master ACS server application stops responding, but the server stays up, the NASs won't fail over to the next ACS server. The reason, TAC says, is that the server is technically up, but not answering the request. I've had several instances when we could not dial in to fix the problem, and had to drive in to restart ACS on the server.

If someone else has experienced either of these problems, and has a resolution, it would be good if you'd share what you know.

Please let me know if this was helpful to you.

Jim

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers