03-15-2019 04:03 AM
During compliance check the following error message pop-up. Any idea how to solve this?
"The requirement cannot be evaluated since you are connected to an untrusted server. Please contact your administrator"
Anyconnect Version = 4.7.01076
Compliance Module = 4.3.562.6144
Thanks
Wing Churn
Solved! Go to Solution.
07-01-2019 10:46 AM
We've figured out the issue. It turns out that on some of the posture checks that are run on the newer AnyConnect packages as well the ISE compliance module, they require for the cert being used in ISE to be trusted. So we exported the self-signed default cert from ISE that we were using and imported it to the endpoint's trusted root certification authorities, and the posture checks were moved forward and continued.
03-28-2019 09:41 AM
Not a known issue with ISE.
Please gather a DART bundle from the affected system, open a TAC case if not done already, and submit it to TAC for investigation.
06-26-2019 12:23 PM
Hi Wing Churn,
Were you able to find a solution to this issue? Do we have to import a certificate from somewhere to the endpoints?
07-01-2019 10:46 AM
We've figured out the issue. It turns out that on some of the posture checks that are run on the newer AnyConnect packages as well the ISE compliance module, they require for the cert being used in ISE to be trusted. So we exported the self-signed default cert from ISE that we were using and imported it to the endpoint's trusted root certification authorities, and the posture checks were moved forward and continued.
07-01-2019 08:22 PM
Good to hear that. We did not continue further as it was a time sensitive PoV.
Thanks
Wing Churn
02-07-2022 03:30 AM
Hi I run anyconnect 4.10 with latest compliance module.
I am still getting the pop up
FYI i have the certificates trusted for all services and also it is signed by internal CA.
Still showing this error.
"The requirement cannot be evaluated since you are connected to an untrusted server. Please contact your administrator"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide