AP configuration in CISCO Prime 3.1

[gauravpundir231]

Hi All,

Can anyone please advise or share a document/video/article on how to configure AP in cisco prime apart from cisco official doc on prime infra.

We have remote WLC and are statically assigning IP & controller IP to AP

[Flavio Miranda]

Hi,

 Go to Configuration tab and then Network Device. On the left side hand Prime will list all device type. Choose AP and the AP model you have.

 As soon as you see the list of APs, just click in any of it.

 At the AP level you have Device Configuration and Device Detail.

 I'm not point you to any guide cause this is a pretty simple task.

 Prime is in my opinion very intuitive tool.

 If you have a specific configuration to perform and don't know how, just let me know.

 If you need to setup many APs with same config you can use template and apply all at once.

-If I helped you somehow, please, rate it as useful.-

[gauravpundir231]

Thanks for the revert.

i mean i know how to go to config part. (basic things AP name, controller name etc)

Bt i want to know each and every option configuration tab has (what they do and what will be their impact) on AP configuration page

[Flavio Miranda]

Unfortunately you may not find such detailed guide. 

 You may find this information in WLC guide or even AP guide.

 Prime guide usually expected you to have previous knowledge about Cisco gear and Wi-Fi as technology.

 They attain to the fact of explain how to something using Prime but they will not deep dive on each detail.

 You can find Cisco Prime doc here

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug.html

-If I helped you somehow, please, rate it as useful.-

[agrissimanis]

You can also check out Cisco Live presentation catalog, there are several sessions about wireless management with Cisco Prime, I think you will find them useful.

Please rate if helpful