Apply Cisco ISE Default Setting

[mrigank shekhar chaubey]

There is a starange exhibit while trying to accomplish following on WLC-2504 (SW ver. 8.5.182.0)

"Apply Cisco ISE Default settings" under WLAN > Edit 'XYZ' > Security > AAA Servers

The "Apply Cisco ISE Default settings" checkbox, under Radius Servers dissapears itself. Any suggestion for the remedy pls

[marce1000]

 - What is your ISE version ? ; as for the wireless controller and according to https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html
              Consider using : https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6

 M.

[mrigank shekhar chaubey]

ISE Version is 3.2.0.401 v01

[marce1000 · Accepted solution]

                                                  >ISE Version is 3.2.0.401 v01
  - That is good ; recent version ; you may try the latest patch for ISE 3.2 (too) and upgrade the controller to the recommended release : https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6

 M.

[thomas · Accepted solution]

I don't know how you got ISE 3.2.0.401. That is not a released and supported version of ISE. The offiicial ISE 3.2 image is 3.2.0.542.

The problem you describe is with the WLC, not ISE. Possibly a web browser or caching issue? If that does not work, call TAC.