Authenticate Aruba mobility controller with ISE server 3.3

[schadracpierre]

Team,

I am trying to authenticate using ISE server 3.3 as my radius server on my Aruba controller. When I double-checked my log on ISE server, I got this error below:

22043 Current Identity Store does not support the authentication method; Skipping it

I can ping, traceroute, and ssh through ISE using my Aruba controller.

TIA

[balaji.bandi]

 ISE server 3.3 as my radius server on my Aruba controller

is this for 802.1x for Wireless Clients ?

check example :

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200270-ISE-2-0-3rd-Party-integration-with-Aruba.html

also check some WLAN config :

https://www.netprojnetworks.com/basic-aaa-802-1x-wlan-authentication/

as per the error its information - check the Protocol ID / supported protocol

• Message Code: 22043

  Severity: INFO

  Message Text: Current Identity Store does not support the authentication method; Skipping it

  Message Description: Current Identity Store does not support the authentication method. Skipping it.

  Local Target Message Format: <timestamp> <seq_num> 22043 INFO Authentication: Current Identity Store does not support the authentication method; Skipping it, <log details>

  Remote Target Message Format: <pri_num> <timestamp> <IP address/hostname> <CISE_logging category> <msg_id> <total seg> <seg num><timestamp> <seq_num> 22043 INFO Authentication: Current Identity Store does not support the authentication method; Skipping it, <log details>

[schadracpierre]

Thabks for sharing !

do you know which I can use for the NAS IP Address ?