authentication in PIX 525 with two aaa-server

[arturo.reyna]

Hi everybody:

I have a PIX 525 with 6.3(3) and two cisco secure appliance as aaa-servers.

The problem is that the PIX in sometimes the authentications is trough the CS1 and sometimes is through the CS2, in both cases both cisco secure is up and running and i don´t know if these is a normal behavior in the way authentication works.

I tried with routers and switches with both aaa server and all the time send the authentication packets to the Cisco secure 1(primary).

Can somebody of you know about it?

Thankyou.

[umedryk]

This depends on how you configured your firewall ( the key and ipaddress command I think )