Authentication proxy on ISR 4331 - "ip auth-proxy" command missing

[kasper123]

I'm trying to migrate an authentication proxy command configuration from an older router to a new ISR 4331. It currently uses tacacs+ for authentication.

The old configuration has the ip auth-proxy command but in the ISR this command is not available.

The ISR 4331 is an AX bundle (if that's important).

Does anyone have an example for this configuration on an ISR 4000?

[nspasov]

Hi there, is this what you are looking for:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_auth/configuration/xe-3e/sec-usr-auth-xe-3e-book/sec-web-auth-proxy.html

Thank you for rating helpful posts!