Is it possible to configure AAA and EAPFAST on a 3750G switch to use a vlan other than vlan1 for management/native vlan? We are working with RADIUS on Server 2008.
Is it possible to configure AAA and EAPFAST on a 3750G switch to use a vlan other than vlan1 for management/native vlan? We are working with RADIUS on Server 2008.
Dear allBasic Setup -1st problem:In the Test Lab : I have Cisco ACS 1121 device and in that i have Added all network devices - routers and switchesNow i have to authenticate with Active directory. In active directory i have created users and added...
Hello all. I can ping and trace to this TACACS server. but I can't get it to authenticate my telnet users. I configured local AAA fallback so it tries the remote server several times and then falls back to the local TACACS. I noticed the logs show TC...
We had a consultant set up our wireless infrastruction a couple of years ago and for the most part I was hands off (big mistake). He did a great job setting it up, but I got zero knowledge transfer.We authenticate laptop users using machine certific...
I'm a complete noob to ACS, and not strong in the AAA department. I'm trying to implement command sets for helpdesk trouble shooting.I didn't setup the ACS server so I'm assuming that it was setup correctly.As it stands, the people that need ro logi...
When I add locations under Network Device Groups and then try and use them in my Access Policies they don't show up. It just says "No data to display". If I try and recreate them I get an error "Object you are trying to Create already exists.' but it...
Hello all,is that possible to configure email notification alerts in ACS 4.2.
Hi All,I am using ACS 4.2 with ASA 7.0. I am testing downloadable access list for remote VPN users. I've create "permit ip any any" just for testing in ACS, and setup NAF, DACL, assign DACL to the user. but when try to login from VPN client, i got th...
Hi,I am using Wireless AP and users on this AP being authenticated by TACACS using AD accounts.This is a common scenario for world wide location.Once users are authenticated by AD they get the access for Wireless network.I want to add one more AP und...
Hi All , I am new to wireless LAN authencation , I have about 1000 Wireless access point & 15,000 users in my enterprise network , we have 3 acs server version 3.3 ( primary ,secondary , incountry ) , Now we are upgrading this acs serve...
Hi,We are currently testing a new ACS Deployment.We are just testing TACACS authentication at the moment. We would like to map one AD Group, known as DeviceAccess1 to TACACS authentication.Now if we make our condition - SAMaccount name = brad and I...
Dear ACS experts,I am trying to use ACS 4.2 to authenticate and authorize TACACS+ traffic coming from Riverbed Steelhead WAN Optimizer appliance. One of the configuration task is to add the following authorization attribute to the ACS 4.2.service = ...
I am new to ACS.What I want to do is talk to another radius server (safeword) and authenticate users against it on a linux host using pam_radius.What is the minimum steps to do this? (setup groups/policy/users) Using radtest, I can authenticate a l...
Hi All, I have cisco 1120 appliance downgrade from acs 5.0 to acs 4.2.0.124 , I need to upgrade to acs 4.2.1.15 . Does cisco 1120 acs appliance supports 4.2.1.15 , How can i upgrade to 4.2.1.15 from 4.2.0.124 . It requires any d...
Dear allI have geerated new certificate and installed it on my ACS 4.2,it is self generated certificate by ACS.Now end user is not able authenticate automatically.If i mnually install this certificate on end user machine then end user is able to auth...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-19-2025 12:25 AM | ||
06-09-2025 01:32 AM | ||
06-05-2025 03:19 PM | ||
06-03-2025 11:13 AM | ||
05-13-2025 11:14 AM |
User | Count |
---|---|
8 | |
3 | |
3 | |
2 | |
2 |