06-30-2021 02:13 AM
We are implementing dACL with RADIUS on a C9300 switch with IOS 16.9
Our configuration seems to be correct and we have the inbound dACL working on a switchport
Cisco-AVpair = "ip:inacl ...."
But the outbound acl is not applied or rejected
Cisco-AVpair = "ip:outacl ...."
Are outbound dACL with Radius not supported by this switch? Or is it an IOS version issue?
Solved! Go to Solution.
06-30-2021 03:43 PM
DACLs only apply to inbound traffic to the port. None of the Cisco switching platforms (that I'm aware of) support DACLs that apply to traffic outbound from the switchport.
06-30-2021 03:43 PM
DACLs only apply to inbound traffic to the port. None of the Cisco switching platforms (that I'm aware of) support DACLs that apply to traffic outbound from the switchport.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide