Cannot access ACS 5.3 installed in a VM

[srosenthal]

I installed ACS 5.3 on a VM machine for evaluation.  The install went fine as I used the recommended settings in the install guide.  All the services are up and running when I issue the "show application status acs" command. 

I am trying to access the web page via http://192.168.1.199:2002 and it just times out.  I can ping the server and the server can ping my machine.

Any help would be greatly appreciated.

Seth

[Eugene Korneychuk · Accepted solution]

Hi Seth,

ACS 5 is accessible via http, pleases try https://192.168.1.199/

This is user guide:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/my_wkspc.html#wpxref67152

Please rate helpful posts

Best Regards,

Eugene

[srosenthal]

That worked.  Thank you!