cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

362
Views
5
Helpful
3
Replies
Highlighted
Beginner

captive portal url referring to an old domain name

in a pilot, during initial ISE installation setup, I've configured a local domain. after installation, I've then modified it in order to use a corporate domain name resolved by corporate DNS server, but even if  the console accepts the new domain and the ISE GUI shows the correct new FQDN, I have problem with captive portal page resolution because the redirect-url automatically created by the ISE for the CWA still carry the name of the ISE with the old domain used in the initial setup, so creating a problem in resolving the url.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

The only reason that I can think of, the cert presented to the client is still consist the old FQDN. As we have changed the domain name, you need to generate a new certificate and install it on the ISE so that the CN should match the new FQDN.

Jatin Katyal
- Do rate helpful posts -

~Jatin

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

The only reason that I can think of, the cert presented to the client is still consist the old FQDN. As we have changed the domain name, you need to generate a new certificate and install it on the ISE so that the CN should match the new FQDN.

Jatin Katyal
- Do rate helpful posts -

~Jatin

View solution in original post

Highlighted

I will try and let you know.  thanks a lot

Highlighted

Thank you Jatin, I've created a new certificate and now it's ok.