04-03-2003 09:22 AM - edited 02-21-2020 10:06 AM
I want to configure extended authentication against a Windows 2k radius server on a Cisco 1721 for our cisco vpn client users . Does any one have a sample config that would allow me to do this on that router. I have sucessfully done extended authentication on a pix firewall against a WIN2k radius server.
Thanks....
04-03-2003 07:10 PM
Here's one for TACACS (http://www.cisco.com/warp/public/480/ipsec-ios-tacacs.html), so just change the line:
> aaa authentication login userauthen group tacacs
to:
> aaa authentication login userauthen group radius
then add a Radius server with:
> radius-server host x.x.x.x key
04-07-2003 10:45 AM
I only want users to be authenticated when they attempt to make a vpn connection. When I configured the router for AAA it also authenticates me when I try to telnet to it. Is there a way just to have it authenticate users trying to vpn through our serial interface?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide