Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that has two isp connections and is looking for bi-directional redudancy. (Inbound and outbound). Currenly have a Cisco Pix 7 with 6 interfaces total. I have used devices in the past from Fatpipe and Linkproof that provide this ...
Can someone tell me how to create a remote access vpn that authenticates against a Windows 2003 Radius server. In the past I have configured 6.3 against a Windows 2003 server with no problem. In 7.0 with the introduction of Tunnel groups it is diff...
We have a set of Cisco series 3500XL sitches and the IOS is out of date. The current IOS version is (12.05.4)WC(1). The current bin file on the switch is c3500xl-c3h2s-mz.120-5.4.WC.1.bin . I checked the website and have downloaded the following fil...
I am going to configure 2 routers for a client who has a 3160 paradyne csu/dsu that connects two offices via full t-1, 10 channels are being used for voice and the remaing will be used for data. (point 2 oint) We have 2 1721 routers on either side....
I want to configure extended authentication against a Windows 2k radius server on a Cisco 1721 for our cisco vpn client users . Does any one have a sample config that would allow me to do this on that router. I have sucessfully done extended authen...
Rahul thanks for your reply. If I am understanding correctly. We would have to introduce a router that connects isp1, isp2 and the pix. We would have to be running ospf between these devices. From a pix perspective connecting to the router, wh...
Heelo we have a WAFS 511K9 on our network and are having very strange network connectivity issues. We have hard set the WAFS to 100/FULL and on our Cisco 6509 as well. We have several VLANs on our Catalyst switch and upon doing traceroutes and pin...
ZulfiThe problem is that they are already using a CSU/DSU to connect 2 pbx's for voice and are using 10 channels of the T-1. I will have to use that csu/dsu so I will need to get 2 wic 1-t cards(Serial) . Is that correct or is there any way for me...
I have the integrated CSU/DSU Wic's on the routers. I think I would need to use regular serial wics. Is that correct being that there are existing CSU/DSU's on both sides?
I only want users to be authenticated when they attempt to make a vpn connection. When I configured the router for AAA it also authenticates me when I try to telnet to it. Is there a way just to have it authenticate users trying to vpn through ou...
