01-30-2024 07:42 PM
Hi all,
I'm running the below. When in enable mode (or in global config), I'm attempting to put in cts credentials and I'm not seeing that command available. Does this mean this switch does not support Trustsec?
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 14 WS-C3560C-12PC-S 15.2(2)E9 C3560c405-UNIVERSALK9-M
Solved! Go to Solution.
01-30-2024 09:54 PM - edited 01-30-2024 09:57 PM
You can find the latest TrustSec Support Matrix here - https://www.cisco.com/c/en/us/solutions/enterprise-networks/trustsec/solution-overview-listing.html
The 3560-C is a Tier 3 platform that only supports SGT classification and SXP. It does not support inline tagging or SGACL enforcement.
01-30-2024 09:54 PM - edited 01-30-2024 09:57 PM
You can find the latest TrustSec Support Matrix here - https://www.cisco.com/c/en/us/solutions/enterprise-networks/trustsec/solution-overview-listing.html
The 3560-C is a Tier 3 platform that only supports SGT classification and SXP. It does not support inline tagging or SGACL enforcement.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide