cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
970
Views
0
Helpful
5
Replies

Cisco ACS Deployment

s.patsuwan
Level 1
Level 1

  I proposed New ACS 5.4 Appliance - CSACS-1121-K9 and upgrading current ACS 4.1 to ACS 5.4-CSACS-5.4-VM-UP-K9

my customer want to do configuration/databse  replication between two ACS.   Is it possible to that ACS in VM can work  with ACS in appliance ?

thanks

sompoj

5 Replies 5

Jatin Katyal
Cisco Employee
Cisco Employee

There should not be any issues. It will work fine.

ACS distributed deployment.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1058054

ACS 4.x and 5.x replication

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1052580

Regards,

Jatin Katyal


- Do rate helpful posts -

~Jatin

Hi Jatin,

  thanks very much.  Is it possible that version 4.2 can work with 5.4 for replication ?

Current, customer already has version 4.2

thanks

sompoj

In order to perform replication, both the devices should be running on the same code/patch. ACS code 4.2 can not replicate its database with ACS 5.4

Regards,

Jatin Katyal


- Do rate helpful posts -

~Jatin

Hi sompoj / All ,

,

our customer also need the same requirement. i have added the ACS in primary and secondary.

i tried the failover but it was not working.

what are the commands have to give in the switch side for the failover deployment?

Please help.

Thanks,

P.Ramkumar.

Hi sompoj,

Refer this video link it may be helpful for replicate the ACS 5.4 servers.

http://www.labminutes.com/sec0099_acs_distributed_deployment.

Thanks,

P.Ramkumar.