02-20-2013 06:51 AM - edited 03-10-2019 08:06 PM
I proposed New ACS 5.4 Appliance - CSACS-1121-K9 and upgrading current ACS 4.1 to ACS 5.4-CSACS-5.4-VM-UP-K9
my customer want to do configuration/databse replication between two ACS. Is it possible to that ACS in VM can work with ACS in appliance ?
thanks
sompoj
02-20-2013 08:31 AM
There should not be any issues. It will work fine.
ACS distributed deployment.
ACS 4.x and 5.x replication
Regards,
Jatin Katyal
- Do rate helpful posts -
02-25-2013 08:02 PM
Hi Jatin,
thanks very much. Is it possible that version 4.2 can work with 5.4 for replication ?
Current, customer already has version 4.2
thanks
sompoj
02-25-2013 10:43 PM
In order to perform replication, both the devices should be running on the same code/patch. ACS code 4.2 can not replicate its database with ACS 5.4
Regards,
Jatin Katyal
- Do rate helpful posts -
02-20-2014 03:16 AM
Hi sompoj / All ,
,
our customer also need the same requirement. i have added the ACS in primary and secondary.
i tried the failover but it was not working.
what are the commands have to give in the switch side for the failover deployment?
Please help.
Thanks,
P.Ramkumar.
02-20-2014 03:29 AM
Hi sompoj,
Refer this video link it may be helpful for replicate the ACS 5.4 servers.
http://www.labminutes.com/sec0099_acs_distributed_deployment.
Thanks,
P.Ramkumar.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide