Cisco ACS Deployment

[s.patsuwan]

  I proposed New ACS 5.4 Appliance - CSACS-1121-K9 and upgrading current ACS 4.1 to ACS 5.4-CSACS-5.4-VM-UP-K9

my customer want to do configuration/databse  replication between two ACS.   Is it possible to that ACS in VM can work  with ACS in appliance ?

thanks

sompoj

[Jatin Katyal]

There should not be any issues. It will work fine.

ACS distributed deployment.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1058054

ACS 4.x and 5.x replication

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/introd.html#wp1052580

Regards,

Jatin Katyal


- Do rate helpful posts -

[s.patsuwan]

Hi Jatin,

  thanks very much.  Is it possible that version 4.2 can work with 5.4 for replication ?

Current, customer already has version 4.2

thanks

sompoj

[Jatin Katyal]

In order to perform replication, both the devices should be running on the same code/patch. ACS code 4.2 can not replicate its database with ACS 5.4

Regards,

Jatin Katyal


- Do rate helpful posts -

[ramkumar]

Hi sompoj / All ,

,

our customer also need the same requirement. i have added the ACS in primary and secondary.

i tried the failover but it was not working.

what are the commands have to give in the switch side for the failover deployment?

Please help.

Thanks,

P.Ramkumar.

[ramkumar]

Hi sompoj,

Refer this video link it may be helpful for replicate the ACS 5.4 servers.

http://www.labminutes.com/sec0099_acs_distributed_deployment.

Thanks,

P.Ramkumar.