12-06-2016 05:54 PM - edited 03-11-2019 12:16 AM
Hi Sir:
I had setup the windows AD in the Cisco ACS. I had tested it and test result is ok. Why I have below "Disconnect " message.
12-07-2016 05:23 PM
Hi there. Can you tell me:
1. What version of ACS you are running?
2. What type of domain controller do you have?
3. The type of browser used to manage ACS
4. Do you have the proper domain permissions for the ACS account when trying to join ACS to your domain?
Thank you for rating helpful posts!
12-08-2016 05:16 AM
Hi Neno:
Below is my client status.
Long time ago. The ACS works normally. After he export the ACS configure and import to new
ACS. Then it works abnormally. He don't know why.
But I will ask my client about these four question.
ps. Could you provide me any recommendation ? Does it has any troubleshooting procedure or logs that I can capture it ?
12-17-2016 05:49 PM
Hi Sir:
I found client's ACS adclient daemon didn't run. I also tried to restart daemon and restart ACS. But it didn't work.
Process 'database' running
Process 'management' running
Process 'runtime' running
Process 'adclient' Execution failed
Process 'view-database' running
Process 'view-jobmanager' running
Process 'view-alertmanager' running
Process 'view-collector' running
Process 'view-logprocessor' running
12-18-2016 06:15 PM
Hmm, that will definitely cause your problem :)
So you tried both:
1. Restart ACS completely
2. Tried to stop and stop the ACS application with:
application stop acs
application start acs
If yes I have the following questions:
1. Still would like to know the version and patch level of the ACS installation. You could be hitting a bug like these ones:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuy89193
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtr35827
2. Can you confirm that the time is working properly on the server? I need you to check and confirm that the clock is showing the correct data and time, the NTP server is configured, NTP is synchronizing.
Thank you for rating helpful posts!
12-18-2016 06:45 PM
Hi Sir:
We had also tried to app stop/start acs. But it didn't work.
ps: The ACS version 5.2.
12-18-2016 06:52 PM
Looks like you might be hitting the second bug that I listed. Did you try the workaround commands suggested in the bug?
Workaround:
'acs start adclient' after 'acs stop adclent'
Thank you for rating helpful posts!
12-18-2016 06:56 PM
Hi Sir:
My workaround is:
1.acs start adclient' after 'acs stop adclent
2. shutdown and restart ACS server.
3.But it didn't work.
12-19-2016 10:04 AM
Hmm, I am afraid I am out of suggestions here. You can try to upgrade to a later version with a recent patch. It might not be a bad idea to reach out to Cisco TAC and get some feedback from them. They can also deploy a root patch and be able to have a more in-depth look under the covers.
Thank you for rating helpful posts!
12-19-2016 04:52 PM
Hi Neno: I got it. I will try to upgrade it to 5.6. Thanks a lot.
12-21-2016 12:52 PM
Sounds good. Please let us know what the outcome is!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide