06-06-2019 10:07 AM - edited 06-06-2019 10:09 AM
Hi Folks,
In the past month my VPN AnyConnect is constantly reconnecting. From every 3 minutes to every 15 minutes at times. This is a major blocker for attending meetings and workflow interruptions.
I've tried various changes from IPv6 disabling to MTU adjustments but none of these tweaks are correcting the problem.
Macbook Pro 15-inch, 2018
macOS Mojave 10.14.5
Cisco AnyConnect Secure Mobility Client Version 4.7.01076
AT&T Gigabit
Router Model | 5268AC |
Hardware Version | 260-2173300 |
Software Version | 11.1.0.531418-att |
I did do a test and spent 1.5 hours at Starbucks connected to the VPN with no issues. What is it with AT&T and Cisco combination that is causing the constant reconnects?
Thanks for any help.
11:23:53 AM Reconnecting to ******.com...
11:23:55 AM Establishing VPN - Examining system...
11:23:55 AM Establishing VPN - Activating VPN adapter...
11:23:55 AM Establishing VPN - Configuring system...
11:23:58 AM Establishing VPN...
11:23:58 AM Connected to ******.com...
11:25:53 AM Reconnecting to ******.com...
11:25:56 AM Establishing VPN - Examining system...
11:25:56 AM Establishing VPN - Activating VPN adapter...
11:25:56 AM Establishing VPN - Configuring system...
11:25:58 AM Establishing VPN...
11:25:58 AM Connected to ******.com...
11:27:01 AM Reconnecting to ******.com...
11:27:03 AM Establishing VPN - Examining system...
11:27:03 AM Establishing VPN - Activating VPN adapter...
11:27:03 AM Establishing VPN - Configuring system...
11:27:06 AM Establishing VPN...
11:27:06 AM Connected to ******.com...
11:30:37 AM Reconnecting to ******.com...
11:30:39 AM Establishing VPN - Examining system...
11:30:39 AM Establishing VPN - Activating VPN adapter...
11:30:39 AM Establishing VPN - Configuring system...
11:30:52 AM Establishing VPN...
11:30:52 AM Connected to ******.com...
11:32:37 AM Reconnecting to ******.com...
11:32:40 AM Establishing VPN - Examining system...
11:32:40 AM Establishing VPN - Activating VPN adapter...
11:32:40 AM Establishing VPN - Configuring system...
11:32:42 AM Establishing VPN...
11:32:42 AM Connected to ******.com...
Solved! Go to Solution.
06-06-2019 01:26 PM
06-06-2019 10:52 AM - edited 06-06-2019 10:54 AM
Please reach out to the TAC. This could be something wrong at any different places. There is also the anyconnect VPN community that might be able to assist.
Check out the http://cs.co/ise-guides
For more information on getting help for troubleshooting break fix please check out http://cs.co/ise-help under how to get help from the community
06-06-2019 01:26 PM
06-06-2019 02:07 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide