cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

6549
Views
5
Helpful
7
Replies
kamarale
Beginner

Cisco AnyConnect NAM with profile editor

Hello,I´m trying to use the anyconnect NAM with also the anyconnect profile editor for 802.1x
I created a profile (.xml) with the editor but I don´t know how to apply it to a client(anyconnect).
If anyone can give me some instructons I would appreciate it.

Thanks in advance.
Regards.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Amjad Abdullah
Engager

i hope this link is useful, it illustrates everything:

https://supportforums.cisco.com/docs/DOC-23117

Install and run the standalone profile editor (your second download); you only need the Network Access Manager component

     a. Once installed, open the profile editor and configure a new profile, e.g. allow EAP types, disable Wired port management, etc.

     b. File / Save as...

     c. Name the file configuration.xml. This naming convention is required

     d. Save the configuration file to the //Profiles/nam folder

3. Run the main Secure Mobility Client setup installer (setup.exe) from . This installs the AnyConnect framework and modules. Select the Network Access Manager modules. No other modules are necessary or required for managing wireless networks

Amjad

Rating useful replies is more useful than saying "Thank you"

View solution in original post

Mike.Cifelli
VIP Advocate

Software Download - Cisco Systems

Profile Editor (Windows)
tools-anyconnect-win-4.10.00093-profileeditor-k9.msi
 
FYSA: default install location on windows = C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager

View solution in original post

7 REPLIES 7
Tarik Admani
Advocate

You will have to use a centralize software management solution in order to get this file out and in the proper location.

Thanks,

Tarik Admani

Isn´t it enough with the anyconnect NAM and the profile editor? What do you mean with "centralize software management solution" ?

Thanks.

To build the profile yes, however you need to push these files to all your clients and you need to distribute this xml to the rest of your organization.

For doing some testing you can modify the current xml that the profile editor is on and save and even some cases restart the machine for new changes to take effect. Which xml file are you modifying?

Thanks,

tarik Admani

Amjad Abdullah
Engager

i hope this link is useful, it illustrates everything:

https://supportforums.cisco.com/docs/DOC-23117

Install and run the standalone profile editor (your second download); you only need the Network Access Manager component

     a. Once installed, open the profile editor and configure a new profile, e.g. allow EAP types, disable Wired port management, etc.

     b. File / Save as...

     c. Name the file configuration.xml. This naming convention is required

     d. Save the configuration file to the //Profiles/nam folder

3. Run the main Secure Mobility Client setup installer (setup.exe) from . This installs the AnyConnect framework and modules. Select the Network Access Manager modules. No other modules are necessary or required for managing wireless networks

Amjad

Rating useful replies is more useful than saying "Thank you"

View solution in original post

Thanks Amjad.

Regards.

Please me give me link to download nam profile editor. tnx.

Mike.Cifelli
VIP Advocate

Software Download - Cisco Systems

Profile Editor (Windows)
tools-anyconnect-win-4.10.00093-profileeditor-k9.msi
 
FYSA: default install location on windows = C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager

View solution in original post

Content for Community-Ad