Cisco ASA 8.3 ldap AAA server setup Microsoft active directory fails

[orsonjoon]

Hello,

I'm trying to set up ldap authentication for remote ssl vpn users like the picture below:

When I try the test button, and enter any username and password I get the message "Authentication Rejected: User was not found"

Why??? Please help, I'm running out of options here... Many many thanks in advance.

[Jatin Katyal]

In the scope section use All level beneath the base DN

Like the below listed doc
http://www.cisco.com/en/US/docs/security/asa/asa71/asdm51/selected_procedures/asdmldap.html#wp1033083

Rgds, Jatin

Do rate helpful posts~

[orsonjoon]

Thanks for the reply.

The "All levels beneath the base DN" option was actually the first thing I ttied to get this to work, but with little effect.

Still got the same message: user was not found.

What'am I doing wrong here? PLease help.....

[Jatin Katyal · Accepted solution]

Use the login DN in the following format.

admin-user-name@domain_name and let me know how it goes.

If the above suggestion doesn't work then please run the debug ldap 255 and paste the output here.

Rgds,  Jatin

Do rate helpful posts-

[orsonjoon]

AH GOT IT!

The Naming Attribute shouldn't be "sAMAcountName", but sAMAccountName, just a typo after all