https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/4_1/b_Cisco_UCS_C-series_GUI_Configuration_Guide_41/b_Cisco_UCS_C-series_GUI_Configuration_Guide_41_chapter_01010.html
n the IP Filtering (Whitelisting) area, update the following properties:
Name Description
Enable IP Filtering check box | Check this box to enable IP filtering. |
IP Filter fields | To provide secure access to the server, you can now set a filter to allow only a selected set of IPs to access it. This option provides four slots for storing IP addresses (IP Filter 1, 2, 3, and 4). You can either assign a single IP address or a range of IP addresses while setting the IP filters. Once you set the IP filter, you would be unable to access the server using any other IP address. |
However, it does not tell you the format. Anyone has done it before can tell what the format looks like without guessing what they are? TIA