Cisco ISE 1.1.3 - Node unreachable

[Imran Mohmmad]

Cisco ISE 1.1.3 is running in standalone mode, when I made any configuration it show me the notification that "Configuration changes has been recorded  but remain pending" any idea experts what could be wrong here.

Thanks

[bhthapa]

For issues regarding this you need to check the Cisco ISE Operations > Troubleshoot > Diagnostic Tools > General Tools > Evaluate Configuration Validator options. It also validate the several check on the  potential network access device (NAD) configuration issues, including AAA,RADIUS, profiler, and web authentication.