12-06-2018 04:12 AM - edited 03-11-2019 01:53 AM
Hello everyone,
I have a problem with Cisco ISE 2.0 and Kaspersky Enpoint Security 11.x and I need your accurate help.
MacAfee was used previously and this is what I used when configuring the posture rule in Cisco ISE. We have now migrated all machines from our computer to Kaspersky Endpoint Security 11.x but currently have the trouble I have when I browse the list of antivirus available with Kasperky to go from MacAfee to Kaspersky Endpoint Security 11.x I do not see this product.
I only see Kaspersky Endpoint Security 8.x and 10.x
You will find in attachment what I have on the list of products available with Kaspersky.
Thank you for your help.
Solved! Go to Solution.
12-06-2018 08:56 AM
Appears you will need to move to 2.2 (recommended) as malware was added in 2.1
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/release_notes/ise21_rn.html#pgfId-678111
This is the compliance module support chart where i found it under malware section (not virus)
12-06-2018 06:50 AM - edited 12-06-2018 07:08 AM
I was looking under antivirus. I see it listed under anti-malware in Cisco AnyConnect ISE Posture Windows Support Charts for Compliance Module v4.3.405.2048:
Also recommend moving to ISE 2.2 to stay current at a minimum
12-06-2018 07:28 AM
12-06-2018 08:56 AM
Appears you will need to move to 2.2 (recommended) as malware was added in 2.1
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/release_notes/ise21_rn.html#pgfId-678111
This is the compliance module support chart where i found it under malware section (not virus)
12-07-2018 12:43 AM
Hello Jason,
Thank you for your usual diligence.
Regards.
12-11-2018 03:27 AM
12-11-2018 04:08 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide