cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

575
Views
1
Helpful
1
Replies
Highlighted
Cisco Employee

Cisco ISE 2.0 to 2.1 upgrade issue

I am trying to upgrade an ISE cluster with version 2.0 patch 2 to version 2.1 but am encountering an upgrade

failure at step 10   “Error%  M&T database upgrade failed”  and the upgrade exits with rollback on the secondary node.

What could be the possible reason with the upgrade failure here.  I have in total 6 nodes , 1 primary, 1 secondary &

4 PSNs . Could somebody help here please.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

If operational data not important to you, then it would be a lot quicker to fresh install this ISE node with ISE 2.1 and join it to the ISE-2.1 deployment.

Otherwise, please check the upgrade logs from ISE admin CLI. First, by "show logging app | include upgrade". Then, "show logging app <individual-upgrade-log-file-name>". Open a TAC case, if possible.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

If operational data not important to you, then it would be a lot quicker to fresh install this ISE node with ISE 2.1 and join it to the ISE-2.1 deployment.

Otherwise, please check the upgrade logs from ISE admin CLI. First, by "show logging app | include upgrade". Then, "show logging app <individual-upgrade-log-file-name>". Open a TAC case, if possible.

View solution in original post

Content for Community-Ad