11-15-2018 04:35 AM
Hello Everyone ,
We have an ISE deployment on one of our customers with 2 PAN and 4 PSN nodes .
The customer has a network of bracnhes (about 500 in number ) where had Cisco Switches and decided
to change Cisco with Huawei Switches , despite of our advise .
The roll out is in progress and we start facing problems with Braches with Huawei Switches after the roll out .
The problem is that in some endpoints when the endpoint power on is goes into a mab loop and tries all time to
authenticate with MAB and not with 802.1x .After some reboots the endpoint successfully performs 802.1x and gets
network access .
I want to ensure that there is no problem with ISE ,since we did not faced any familiar problem with Cisco Switches and also if snyone had familiar problem with Huawei Switches .
I want to notice that the problem occurs until now only in morning hours when the users turn on the endpoints and try to login , we are not facing the problem other hours of the day .
Thank You ,
Palaiologos
Solved! Go to Solution.
11-15-2018 06:50 AM
11-15-2018 07:06 AM
11-15-2018 06:32 AM
>... despite of our advise .
- That is indeed the core problem as ISE is tightly integrated with CISCO solutions and switches I strongly advise against doing that ('switching(!)' to other vendor solutions when ISE was already in place).
M.
11-15-2018 06:50 AM
11-15-2018 06:53 AM
Hello ,
Thanks for advises i just only wanted to be sure and see if anyone else has issues with non-Cisco Switches if anyone
implement ISE with non-Cisco Switches .
Thanks .
11-15-2018 07:06 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide