cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
600
Views
0
Helpful
1
Replies

Cisco ISE Endpoint Report

Arjun176
Level 1
Level 1

Hi,

 

I am see a difference in the ISE endpoint report and Radius Authentication report, the Authorization policy report in Radius authentication log is correct, but in the Endpoint report Authorization policy is showing the default deny access.

 

Is this a bug in the Cisco ISE?. If so is there any workaround to get the correct details in the endpoint report without upgrading the ISE software version.

 

1 Accepted Solution

Accepted Solutions

Timothy Abbott
Cisco Employee
Cisco Employee

It is possible it is a bug.  Please work with the TAC to verify.

 

Regards,

-Tim

View solution in original post

1 Reply 1

Timothy Abbott
Cisco Employee
Cisco Employee

It is possible it is a bug.  Please work with the TAC to verify.

 

Regards,

-Tim