- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2020 11:48 AM
Cisco BYODHi All ,
i have ISE 2.4 Patch 9 . Integrated with Cisco Wireless Flex-connect and MDM.
BYOD portal is not working .
user ( iphone ) is successfully connects to wireless network.
Redirect to the portal URL and show error "Safari could not open the Page because the server stopped responding "
Please advise .
Solved! Go to Solution.
- Labels:
-
Identity Services Engine (ISE)
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2020 02:24 PM
Hi Aslam,
There could be a number causes for this issue depending on whether you are using Single-SSID or Dual-SSID flows, including DNS resolution issues, Apple Captive Network Assistant issues, redirect and/or Flex ACL issues, etc.
I would suggest reviewing the following documents to compare against your architecture and configuration:
Cisco ISE BYOD Prescriptive Deployment Guide
Wireless BYOD for FlexConnect Deployment Guide
If you're still having issues, either provide more details on the setup, any relevant logs, and troubleshooting performed so far or open a TAC case to investigate.
Cheers,
Greg

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-15-2020 02:24 PM
Hi Aslam,
There could be a number causes for this issue depending on whether you are using Single-SSID or Dual-SSID flows, including DNS resolution issues, Apple Captive Network Assistant issues, redirect and/or Flex ACL issues, etc.
I would suggest reviewing the following documents to compare against your architecture and configuration:
Cisco ISE BYOD Prescriptive Deployment Guide
Wireless BYOD for FlexConnect Deployment Guide
If you're still having issues, either provide more details on the setup, any relevant logs, and troubleshooting performed so far or open a TAC case to investigate.
Cheers,
Greg
