Cisco ISE Home dashboard NOT displays live consolidated and correlate

[Mini2]

Hi admin
How to display the device and admin group data information,
I have added 4649 network devices but can't see the sync to the Cisco ISE Home Dashboards.
Thanks you!

hh

hh
 

[Mini2]

[thomas · Accepted solution]

The dashboard shows correlations based on actual authentication events and sessions.

You have no authentications yet so there is no data on the dashboard.

Perform authentications with endpoints and you will begin to see the Dashboard populate.

[Mini2]

I have Performed tacacs authentication with network device But still not seeing the data in the dashlets.
Please help problem.

[chansitw]

Are there any radius authentication activity on ISE?

I understand that dashboard show only the summary data of RADIUS activity.

Usually you can see graph utilization in system summary If graph in system summary disappered you should verifies connection between primary PAN and other node.

[sujanyakj]

I too am having the same issue .I connected few devices and performed the radius and tacacs authentication activity. But still not seeing the data in the dashlets.

[daniel lugo]

Hi Sujanyakj,

Have you by any chance just updated your license?