Cisco ise integrate with brocade switch

[jewfcb001]

Hi All,

We try to integrate Cisco ise with brocade switch for radius authentication device. But after done the configuration can login brocade switch  but cannot configure. Please help for my concern.

[JPavonM]

I seems like you are not authorizing the connections with the proper role.

Are you using TACACS+ or RADIUS?

Have you checked these posts?

https://community.cisco.com/t5/network-access-control/aaa-tacacs-with-brocade-switches/m-p/2110595/highlight/true#M156065

https://www.dell.com/support/kbdoc/en-us/000224122/connectrix-brocade-tacacs-authentication-failure-rbac-permission-denied-when-executing-commands-on-the-switch

https://techdocs.broadcom.com/us/en/fibre-channel-networking/fabric-os/fabric-os-administration/9-1-x/v26752435/v26753145/v26752291/v26750992/v26753203.html

[thomas]

How to Ask The Community for Help 

You have not provided any configuration details so there is nothing to suggest or comment on.

[ahollifield]

https://cs.co/ise-interop