Cisco ISE integration with Ruckus SmartZone for Guest service

[Dicmun Phang]

Hi experts,

Has anyone know if Ruckus SmartZone integration with Cisco ISE for Guest Service (CWA) supported?

Our compatibility docs only says Ruckus ZoneDirector is supported with Guest service.

[Jason Kunst]

Please check with ruckus as to what they support. If they can do coa and redirects then likely to work but would need to be setup and validated by customer team

[Dicmun Phang]

Thanks Jason. We're trying to configure it in NAD however it seems the description of the device profile doesn't tally with our release notes.

device profile says native URL redirect not supported, but our release notes says otherwise. Did we test ZD1200 with guest url redirection? or we should use the workaround of walled garden with DNS/DHCP ? Please advise.

[Craig Hyps · Accepted solution]

Reading the support chart, it indicates that it was tested with basic AAA functions in 2.0 and web flows in 2.1 which implies the use of the captive portal.  If Ruckus has a way to perform static or dynamic URL redirect, it is worth testing in lab without the need for DNS/DHCP sinkhole VLAN.