Cisco ISE Integration with Solarwinds

[NeWGuy1109]

I am trying to integrate Cisco ISE with Solarwinds via snmpv3.. however..in CLI prompt ISE is asking for a remote EngineID.. is this EngineID of slolarwinds ? how can i get this EngineID ?

[balaji.bandi]

Below document provide how to get Engine ID :

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/215521-configure-and-understand-snmp-traps-to-m.html

[NeWGuy1109]

Thanks for the reply.. the configuration asks for a remote engineID ..shudnt this be of Solarwinds ? i can check local engineID via "show snmp-server engineID"  but i am not sure about remote engineID

[balaji.bandi]

Can we get the screenshot what you doing to get clarity ?

[NeWGuy1109]

Its in a Ctirix ..so difficult to get a screenshot ..

snmp-server host 10.127.197.81 version 3 SNMPUSER 0x474b49494c49464e474943 plain authpasswd privpasswd

referring the above snippet as an example.. my query is about " 0x474b49494c49464e474943 ' .. how can i get this remote engine ID ?

[balaji.bandi]

This Citrix config - not related to ISE (isnt it ? or am i missing here ?)

refer this command :

https://docs.citrix.com/en-us/citrix-adc/current-release/system/snmp/configuring-snmpv3-queries.html

Note : this is not related cisco community i guesss

[NeWGuy1109]

The command i posted is from ISE CLI.. while trying to configure SNMP V3 in Cisco ISE CLI.. it asks for a RemoteEngineID which i highlighted in my previous comment.. i am unable to get a screenshot as i work in a Citrix Environment.

Query is not related to Citrix

[Marvin Rhoads · Accepted solution]

The engineID for the Solarwinds NPM side can be retrieved via a database query as described in the following Thwack thread:

https://thwack.solarwinds.com/product-forums/network-performance-monitor-npm/f/forum/56729/how-to-configure-snmpv3/189354#189354

[balaji.bandi]

Appologies for the misunderstanding, got it now.

 @Marvin Rhoads  provided good resource now for your reference. Hope that helps you.