ā12-26-2017 04:17 AM - edited ā02-21-2020 10:42 AM
hi,
i m unable to transfer CSV reports to a FTP repository.
the repository pass the validation phase, R/W permission are given.
when i click export to "repository CSV" and select the repository, it shows that the report has been successfully exported, however i dont find it in the repository.
Any ideas guys?
Version 2.2.0.470
Thank you
ā07-10-2019 05:13 AM
hi,
i also have the same issue, it was working fine till last week but it stopped working now and am not sure what could be the issue.
Did you manage to find a solution for this.
regards
Arjun.S
ā01-12-2024 04:47 AM
Also currently having this problem. The zip folder shows up on the repository but there is no file in the folder. I also have the backups sent to this same location and they are working and transferring fine.
ISE version is 3.1.0.518
Thanks in advance.
ā01-12-2024 09:23 PM
@caustin I would suggest trying a different repository, such as the localdisk folder in ISE. If still problematic, please open a case with Cisco support.
ā01-12-2024 10:14 PM - edited ā01-16-2024 03:15 AM
Thank you for sharing this.
ā03-29-2024 04:30 AM
quick update on topic (though repo protocol is sftp). we've experienced the same issue: a) PPAN conducts either ondemand or scheduled report to the sftp repo & marks it as successful; b) no report actually can be found in repo; c) during t/s with TAC it was noticed that copying report to repo timeouts (no source indicated thought); d) having some suspects we came to CLIs of MnT nodes & added host-keys for repo; e) exporting reports to repo started to work.
& i have to say it... ISE gets worse & worse from SW to SW... sad...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide