Cisco ISE User Guest allocated with load-balance vlan on flex-connect wlc

[budilasmono]

Dear all,

Is it possible, for Guest to authenticate on ISE.

ISE will return the group vlan/list of vlan to the WLC.

And the WLC will assign/match vlan group/list of vlan to the existing flex-connect ?

By this scenario each guest member, which authenticated to ISE, will got different vlan (allocated on group vlan/list) with the same profile on WLC ?

Thanks a lot,

BL

[Philip91]

Hello BL,

you don´t need ISE with Dynamic VLAN assignment for this.

Just create an interface group with your VLANs, map it to the guest SSID and send a normal access permit from ISE to WLC. Then WLC will push the permited guests to any vlan in the interface group. For sure this works only with flexconnect central switching.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010100100.html

Greetings

Philip