Cisco ISE

[Orkhan Hajizada]

Hello! I'm trying to log in Cisco ISE, but it says: 

"Password is expired. Please reset your admin password."

I tried to log in with ssh, it says: 

WARNING: Your password has expired.
You must change your password now and login again!
Changing password for user Admin.
Current password:
Current Password:
passwd: Authentication token manipulation error

How can I fix it?

[Mark Elsen]

         - Make sure the current password is correct (/valid) - to start with , 

 M.

[Orkhan Hajizada]

It's correct

[Mark Elsen]

 - Are you trying to use GUI or CLI ?

 M.

[Orkhan Hajizada]

"Password is expired. Please reset your admin password."    -  this is shown on GUI 

"WARNING: Your password has expired.
You must change your password now and login again!
Changing password for user Admin.
Current password:
Current Password:
passwd: Authentication token manipulation error"  -  this is shown on CLI

[Ashok09]

Password is expired. Please reset your admin password.

So i reset the both password 

SSH Admin 
ISE Application password 

after that also finding the same problem, login through web console 

Safer side restarted the ISE also

[Charlie Moreton · Accepted solution]

You will have to boot to the installation media (USB or ISO image) and select the option to reset the password.

[davidgfriedman]

Before you reboot, execute "show disks".  Just make sure / isn't full.  I tried to change a password once and it would not take.  It turns out that somehow / was full so I had to make a few tiny bits (a few K for the system backup of the password file) of space for the file to save. It turns out I had plenty of core dumps (ISE v2.2) I could delete in order to space. 

[Orkhan Hajizada]

@Charlie Moreton @davidgfriedman @Mark Elsen Thank you, I will try to boot and reset password